belt bucket elevator

belt bucket elevator for conveying small lumpy materials

Belt bucket elevator is a kind of equipment used to lift materials vertically through rubber belt as traction member, mainly used for conveying loose materials, powder, granular, small pieces of non-abrasive, non-abrasive materials.

Contact Us
Description

Belt bucket elevator is widely used in mining, chemical, grain, building materials and other industries. The density of the material is usually less than 1.5 tons/m3, and the temperature of the material is usually within 60°C. If the steel wire tape is used, the temperature of the material can be increased to 80°C, and when the heat-resistant rubber belt is used, the temperature of the material can reach 150°C. The lifting height of this equipment is usually between 4 and 30 meters.

Features of the belt bucket elevator:

  1. Simple and efficient structure: the belt bucket elevator adopts rubber belt as traction body, compact structure, stable operation.
  2. Strong adaptability: suitable for powder, granular and small pieces of material vertical lifting, can meet different process requirements.
  3. Good sealing: the equipment is designed with a good sealing device, which can prevent dust leakage during the conveying process and ensure a clean operating environment.
  4. Flexible discharging mode: according to the characteristics of the material can be selected mixed or centrifugal discharging mode, to adapt to different working conditions.

Advantages of belt bucket elevator:

  1. Low power consumption: compared with similar equipment, the driving power of the belt bucket elevator is smaller, more economical operation.
  2. A variety of discharging methods: according to the type of material and process requirements, the elevator can choose inflow, mixed or centrifugal discharging methods, improving its flexibility and adaptability.
  3. Environmental protection design: closed conveying system and equipped with sealing device, effectively prevent the leakage of material dust, to ensure the cleanliness of the operating environment and environmental protection.
  4. Widely used: can be used for a variety of materials lifting, less dense, non-abrasive materials, and the lifting height is flexible and adjustable.

The working principle of belt bucket elevator:

The traction member of the belt bucket elevator is rubber belt, and the hopper is fixed on the rubber belt. The rubber belt is wrapped around the head and bottom rollers of the elevator, forming a closed loop system. During operation, the drive unit transmits power to the rubber belt and the hopper through the head drum, so that the material enters the hopper from the inlet at the bottom of the elevator. The hopper in the up and down movement of the material will be lifted to the head of the discharge port, the material in the centrifugal force and gravity under the joint action of the discharge port from the discharge. This equipment realizes the continuous lifting of materials, and the spacing of the hopper and the discharging method can be adjusted according to the needs.

Application areas of belt bucket elevator:

  1. Mining industry: used for vertical lifting of bulk materials such as ores, coal, etc.
  2. Chemical industry: suitable for fertilizer, powder chemical raw materials, such as transport.
  3. Grain industry: lifting grain such as wheat, corn and other powdery materials.
  4. Building materials industry: for cement, lime, gravel and other materials lifting.
  5. Environmental protection: Due to good sealing performance, it can be used in the environment with high requirements for environmental protection and reduce dust pollution.