electric submersible pump for farmland and garden irrigation

electric submersible pump body part:

1. Cast iron pump body, special anti-rust treatment: cast iron material is used, and after special anti-rust treatment, it enhances the corrosion resistance and anti-wear performance, suitable for long-term use in water.
2. German technology mechanical seal: to ensure that the pump is well sealed, reduce leakage and extend the service life of the pump body.
3. Taiwan imported “O” ring: to provide better sealing performance, to avoid internal and external leakage of the pump, improve safety.
4. Alloy impeller: the impeller is made of corrosion-resistant alloy material, which enhances the working efficiency and service life of the pump.
5. Steel Mirror Finish Shaft: The shaft is made of steel material with mirror finish, which reduces friction and enhances the wear resistance of the pump.
6. AISI304 stainless steel fittings: all parts that contact water are made of AISI304 stainless steel to ensure high corrosion resistance and long time stability.
7. Liquid temperature: +50°C: suitable for use in different temperature environments, able to operate stably at a liquid temperature of 50°C.

Motor part:

1. Silent bearing: the motor uses silent bearing to reduce the running noise, suitable for places that need a quiet environment, such as residential areas.
2. Copper wire motor: the motor is made of high-quality copper wire, which has better conductivity and durability, improves motor efficiency and reduces energy loss.
3. Stator and rotor national standard cold rolled silicon steel sheet: high quality cold rolled silicon steel sheet, improve the operating efficiency and stability of the motor, reduce power loss.
4. Single-phase motor with built-in thermal protection device: The motor has a built-in thermal protection device to avoid damage to the equipment due to overheating, providing safe automatic protection and reset function.
5. Insulation Grade: F: The insulation grade of the motor is F, which can withstand higher temperatures and ensure the stable operation of the motor for a long time.
6. Protection grade: IPX8: The protection grade of the motor is IPX8, which can prevent water immersion and is suitable for working underwater to guarantee the safety of use.
7. Ambient temperature: +40 °C: suitable for use in higher ambient temperatures, to ensure that the equipment works normally in a 40 °C environment.
8. Voltage range: 160-230V/50Hz, low voltage start 120V: adapt to a variety of voltage environments, able to start and run normally in areas with large voltage fluctuations.

The electric submersible pump is suitable for the following scenes:

1. Rural well pumping: provide solutions for groundwater pumping in rural areas to ensure farmers’ water needs.
2. Agricultural drainage and irrigation: widely used in agricultural irrigation and paddy field drainage, helping farmers to improve the efficiency of agricultural production.
3. Garden watering: suitable for irrigation of horticulture, gardens and green areas, ensuring the water source needed for plant growth.
4. Family life water: can provide a stable water source for families to meet daily water needs, suitable for rural and urban neighborhoods.

electric submersible pump Advantages:

1. Strong durability: cast iron pump body and stainless steel fittings, with good corrosion resistance and wear resistance, adapt to complex working environment.
2. High efficiency and energy saving: copper wire motor and silent bearing design improves the working efficiency of the pump and reduces energy loss.
3. Safe and reliable: built-in thermal protection and IPX8 waterproof design, to ensure long-term stable operation of the equipment, not easy to fail.
4. Wide adaptability: applicable to a variety of fields such as farmland, garden, home and industry, to meet the needs of water pumps in different environments.